Take advantage of the hybrid tracking that mixes both mechanical and optical technologies: the EZtrack® Hub is capable of inputting multiple FreeD sources at once such as positional tracker that user can combine with PTZ to enjoy free camera moves.
HYBRID TRACKING FOR YOUR PTZ CAMERAS
Get high modularity on your stage in mixing any studio camera with multiple PTZs as each of these will be tracked with free camera moves! Thanks to the widely used FreeD protocol, the EZtrack® Hub does fusion of the FreeD signal outputted from the PTZ itself and the one outputted from a compatible sensor to enable the positional data on your PTZ camera.
6DOF TRACKING WITH ADDED ROLL & XYZ VALUES
As complement to the pan/tilt/zoom/focus values of the PTZ, the EZtrack® Hub will also read both the Roll and XYZ values of a positional tracker that would have been set onto the rig. This way, any FreeD compatible PTZ can be fully tracked in 6DOF!
UP TO 3 PTZs TRACKING FOR EACH EZtrack HUB
Setup an highly modular cameras rig with the opportunity to combine simultaneously one handheld studio camera with two or three FreeD compatible PTZs of your choice: track these over movable tripods, mechanical sliders, cranes or jibs.
Compatible positional tracker physically installed on the hardware carrying the PTZ base
Wide compliance with all PTZ lines supporting and outputting the FreeD protocol: PANASONIC, SONY, CANON, BIRDDOG …
Track all movements of your compatible FreeD PTZ camera when mounted on a mobile rig
HIGHLY MODULAR WITH LIMITED HARDWARE
Transform any of your static PTZ into a full mobile camera rig with free camera moves!
Our EZtrack® Complete Studio bundle provides all necessary equipment to start tracking your FreeD-enabled PTZs on cranes, jibs, sliders and movable stands, thus, as long as you can manage to install our positional tracker on your gear.
POSITIONAL TRACKER
Install one positional tracker on your PTZ mounting base in using plate, before setting the proper offsets and FreeD transform node into the EZtrack interface.
INFRARED TRACKING SETUP
Set from 2 to 4 Lighthouse Base Station units that will generate the infrared signals at high frequency rate to acquire in realtime the position of your mounted tracker.
FREED SIGNALS FUSION
The EZtrack® Hub does fusion the two FreeD signals into one main carrying pan, tilt, roll, zoom, focus, iris data that will be sent to your 3D render engine.
