Fixed the focus distance unit when using a manually defined lens profile
Fixed the values computed using a manually defined lens profile
[1.7.8]
Fixed
Fixed the encoder values displayed on the edit lens profile modal
[1.7.7]
Fixed
Fixed a bug causing the focal length to be incorrect when using a /i protocol lens that's not a Cooke
[1.7.6]
Fixed
Fixed a bug causing the system to crash on rare occasions when disconnecting an antilatency tracker
[1.7.5]
Added
Added complementary logging that can be toggled in the hardware settings modal
Changed
Reorganized the hardware settings modal
Fixed
Fixed the pose and lens buffer inputs in the timing settings modal
Fixed a bug that would sometimes keep the software from updating correctly
Fixed entrance pupil from lens profiles not read
Fixed focal from lens profile created from EZtrack not propagated to TCD packets
[1.7.4]
Added
Added Iris node and T-stop calculation when sending TCD packets
Added cmotion lens support
Changed
When exporting data as a .fbx file, EZtrack will now use the current timecode when setting a frames time
Fixed
Fixed lens profiles created from EZtrack calculation errors introduced in version 1.7.1
Fixed a crash happening on some systems where the OS time would sometimes reset
[1.7.3]
Added
Changed
Fixed
Fixed a bug preventing lighthouse devices input buttons to work correctly
[1.7.2]
Added
Changed
Fixed
Fixed a bug preventing config files saved before version 1.7.1 to be loaded correctly
[1.7.1]
Added
Added a way to modify the clamp filter behaviour, including the transition duration, and drift compensation
Changed
Fixed
Fixed .fbx exports not using the correct default referential axes
Fixed .fbx file list being incomplete just after recording
Fixed current .fbx recording sometimes not displaying the correct duration
[1.7.0]
Added
TCD output streams are now fully configurable using TCD profiles defined in settings
Lens profiles from EZprofile can now be imported to configure the lens data sent in TCD packets
FBX record files, containing data from several rigs can now be recorded and exported
A special filter can be applied to Lighthouse trackers to remove any jitter when they are in a static position
Changed
A navigator in read-only mode can now request control upon modifying a protected field
Freed receivers synchronization has been revamped and their evaluation is now closer to the genlock or internal tick
Internal management of the Lighthouse devices list has been overhauled to allow for advanced behaviors to be saved in config files
[1.6.13]
Added
Changed
Fixed
Fixed invalid names attributed to vicon subjects (we were previously using the root segment name)
[1.6.12]
Added
Changed
Updated Antilatency version to 4.0.0
Disconnected Antilatency how have a "disconnected state" instead of being removed from the list
Nodes depending on a disconnected device now use the last pose tracked
Fixed
[1.6.11]
Added
Compatibility with firmware version 2.20
Changed
Fixed
[1.6.10]
Added
Added post mortem debugging tools
Changed
Fixed
Fixed lighthouse noise reduction filter usint too much CPU resources
[1.6.9]
Added
Changed
Fixed
Fixed a rare bug which prevented a software update
[1.6.8]
Added
Roll bar added to 3d view line-up tools
Changed
Fixed
[1.6.7]
Added
Changed
Fixed
Fixed node delay not working properly
Fixed hardware settings not loaded correctly on autoload
[1.6.6]
Added
Changed
Fixed
Fixed antilatency devices reconnection issues
[1.6.5]
Added
Changed
Antilatency devices can now be renamed
Fixed
[1.6.4]
Added
Changed
Fixed
Sensor sizes are now correctly sent in TCD packets
[1.6.3]
Added
Changed
Internal communication port is now set automatically
Fixed
Fixed the compatibility with the Optitrack system
Fixed 3D view representation of dynamic nodes
Fixed encodacam "Add channel" button
[1.6.2]
Added
Changed
Fixed
Fixed a bug where EZtrack would not be able to update
Fixed a bug where Freed nodes would not use settings such as filtering and inversion
Fixed a bug where EZtrack would not be able to load a config file if a synced freed receiver was to be created
[1.6.1]
Added
Changed
Fixed
Fixed a bug where Lighthouse devices would be swapped after connecting a new device
= Fixed a bug where Lighthouse base stations would have the wrong indicator displayed in the 3D window
[1.6.0]
Added
Added a way of modifying EZtrack's network configuration from EZtrackFinder
Added a noise reduction filter to lighthouse devices
Changed
Complete licensing system overhaul
Slightly improved client performances and reliability
Fixed
[1.5.1]
Added
Added a button to restore the previous version of EZtrack from the "About" modal.
EZtrackUpdater will now be updated along the other eztrack components.
Changed
The client can now be deactivated from itself
Improved client performances
Fixed
Genlock phase can now be reset to 0
[1.5.0]
Added
Optitrack plugin
Vicon plugin
VectorNav plugin
Realsense plugin
Rig list drag & drop
TCD protocol
Changed
Every "tracking" nodes have been merged into the "Transform" node
Moved lighthouse universe sync from its modal to the lighthouse tab
Header now only displays systems that are connected to EZtrack
Header now displays the current config file (after loading or saving one)
Device using inputs have to be declared in a new menu
The application can now switch between read-only mode and active mode
Fixed
Moving nodes should now work as expected
Inputs can now be collected from more than 2 trackers at the same time (still limited for controllers).
Pose and lens buffers are now loaded correctly
Axes are now displayed with the correct color when viewing data in "freed" mode
[1.4.7]
Added
Multi-IP output
VectorNav plugin
Changed
Fixed
[1.4.6]
Added
Changed
Fixed
The 3D view no longer crashes if client performances are poor
[1.4.5]
Added
Changed
Nodes adaptive filtering settings overhaul
Fixed
[1.4.5]
Added
Changed
Nodes adaptive filtering settings overhaul
Fixed
[1.4.4]
Added
3D viewer: Line-up tools
Changed
Fixed
[1.4.3]
Added
Changed
Fixed
Input transforms should no longer conflict with rigs default lens settings
[1.4.2]
Added
Changed
Fixed
Nodes should now be movable without risk of duplication
[1.4.1]
Added
Changed
Log files naming
Fixed
IP settings spawning a second server when applied
[1.4.0]
Added
Freed reception
Transform node
Added various buffer/phase options
Current timecode is now displayed in the header
Changed
Transform position and orientation are now filtered separately
Fixed
Wrong attribution of lighthouse devices when using the "Add all" button
[1.3.1]
Added
Added filtering method (One Euro Filter)
Freed output settings
The network configuration can now be updated from the settings window
Changed
If only one com port is detected, it will be used by default as the hardware port
Fixed
Logs taking too much memory when stored in the client
[1.3.0]
Added
Synchronization between multiple systems
SteamVR drivers configuration
A poweroff/restart button
Changed
The presence of a valid license is now rechecked every 30 seconds
Fixed
Random crashes happening upon clearing the referential points
Random crashes happening upon loading a new file
Various client-side bugs relative to the 3D view
[1.2.0]
Added
A top view
Station fov representation in the 3D view
Ability to use the default referential
Changed
Overhaul of the Genlock management, for a better precision of the data sent
Overhaul of the updater for more feedbacks and reliability
Phase is now in ms
Lightouse version updated
Fixed
The name of the log file contains the local time and not UTC
Firmware requirement
Compatible with firmware 2.0.0
[1.1.1]
Added
Access to the documentation pdf through the helper tab
Changed
Rename Internal sync type to Freerun
Add a build number to the version of the software
Fixed
Input fields values were too long
Rig names were not correctly reloaded after being saved
Referential offsets could sometimes be automatically reseted
Firmware requirement
Compatible with firmware 1.4.1
[1.1.0] - 2020-02-25
Added
Interactive documentation tab
Added an indicator when a "genlocked" rig cannot reach the specified ip
Changed
The load on start settings have been moved from the load modal to the settings
Fixed
Major performance improvements
Serial communication reliability
Added a limit to the number of log files saved
Fixed the camera orientation when switching from internal to external view
Firmware requirement
Compatible with firmware 1.4.0
[1.0.1] - 2019-12-06
Added
The app can now be updated through the "settings - about" tab
Now checks if the client and server version match
The position of lost trackers can now be frozen to the last correct value
Changed
Referential definition overhaul
Fixed
config.json file is now restored automatically when corrupted
Drag&drop now works properly on mobile devices
The "add channel" button in the encodacam tab is displayed
The list of rigs now extends when new rigs are added (responsivity)
Firmware requirement
Compatible with firmware 1.3.0
[1.0.0] - 2019-10-31
Added
It is now possible to stop a serial communication, or to swap ports, using port 'COM disabled'
Option to handle auto-calibration from lighthouse system
Status of the Genlock and Lens connections in the webapp
Log file
Automatic ip setting from an usb device
Fixed
Console displays correctly mult-lines messages
Genlock led displays the hardware status
Referential reload
Display on tablet
Firmware Requirement
Compatible with firmware 1.3.0
[0.9.1] - 2019-10-11
Fixed
Phase configuration is properly sent to the hardware
No more error when loading saved settings
No more error when changing the hardware IP
Firmware Requirement
Compatible with firmware 1.1.1
[0.9.0] - 2019-10-07
Added
First release of EZtrack with a web application to remotely control the system
Firmware Requirement
Compatible with firmware 1.1.0
[0.8.0] - 2019-08-30
Added
Reset runtime, config and log directories when starting eztrack, to avoid conflict with other installations
Changed
Update SteamVR to version 1.7.10 beta
Fixed
Fix icon not refreshed when the device is no longer under 20% of charge
[0.7.0]
Added
SteamVR (v1.2.10 beta) is now shipped with the executable
Changed
Default transform is now a Vive node
Remove Null device in the dropdown lists
Always display the trackers first in the dropdown lists
Fixed
The size of the dropdown lists is adjusted to the contents
[0.6.0] - 2019-01-30
Changed
New About window to manage the license
Fixed
Smaller images to see the whole transforms in fullscreen
[0.5.2] - 2018-12-05
Fixed
No more crash when adding/removing transforms while sending messages
[0.5.1] - 2018-11-09
Fixed
Missing pictures
[0.5.0] - 2018-11-09
Added
New licensing system
Changed
Better display of 'About' window
Fixed
'Set Front' and 'Set Right' buttons were grayed the first time the "enabled" checkbox was checked
[0.4] - 2018-10-17
Fixed
Correct rotation sent through FREED protocol
[0.3] - 2018-10-03
Added
New method to set Device Transform.
Changed
One more precision digit to Translation and Rotation values in UI.
[0.2] - 2018-07-24
Added
Fov, zoom and focus added as transforms
OSC protocol
[0.1] - 2018-5-04
Added
Tracking from Vive system
Sync from Encodacam
Custom 6-axis transforms, statics or dynamically measured by encoders
Send resulting tracking data through the network using FREED protocol