Skip to content

Lens Tracking (Manual)


This page details the options for inputing lens tracking values Manually. This method is intended for testing, or calibrating unencoded prime lenses for post-production. For real-time applications, you should setup TCD lens tracking or FreeD lens tracking.

1. Tracking Protocol

This dock is accessible from the Capture step.

Possible values:

2. Manual Tracking Values

Move the sliders to approximately reach the wanted value. The value is propagated through EZprofile in real time as the slider moves.

3. Remote Control Actions

see Using a SteamVR controller as remote


Back to capture workflow: Capture Workflow